Driver Support Document

Juniper E|X DeviceType, 3650 Series, OS version 5.0

Show Tested Devices Grid

SYSOID Mapping
SYSOID MODEL OS VERSION
 1.3.6.1.4.1.6213 E|X 3650 5.0.16

Driver Features Support Grid

Driver FeaturesAccess Methods
(X signifies feature support)CLISNMPTFTPCLI+TFTPSNMP+TFTPFTPCLI+FTPSNMP+FTPCLI+SFTPSCPCLI+SCPSNMP+SCPHTTP/HTTPS
X Driver Discovery   X X                      
X General Access  
(CLI protocols: telnet, ssh1, ssh2, console)
X     X                  
Configuration
X Retrieve Running Configuration release notes X     X                  
  Retrieve Startup Configuration                            
  Retrieve Binary Configuration                            
X Device information parsing  
X Enhanced Layer2 Basic IP information parsing  
X Configuration Deployment to Running         X                  
  Configuration Deployment to Startup                            
  Binary Configuration Deployment                            
Diagnostics
  Routing Table                            
  OSPF Neighbors                            
X Interfaces   X                        
  Modules and Inventory                            
  Flash Storage Space                            
  File System                            
X Uptime     X                      
X ICMP Test   X                        
X Topology Parsing   X                        
  Duplex Parsing                            
  Enhanced VLAN Parsing  
Features
  Software Center                            
  Software Image Synchronization                            
X Password Management  
(Can modify: full password, read-only community strings) 		X                        
X Syslog Configuration and Change Detection   Syslog patterns X                        
X Custom Scripts and Diagnostics  
X                        
  ACL Parsing  
  ACL Provisioning                            
  VLAN Provisioning                            
X Configlet Parsing  
  QoS Parsing  
  VRF Parsing  
  Context Management                            

Retrieve Running Configuration

Release Notes

Invalid configurations may be due to TFTP failures

The Juniper Redline does not report any failure conditions when exporting a configuration via TFTP. If the device is reporting invalid configurations this may be due to unreported TFTP failures by the device.

Workaround:

Capture the session log of a snapshot and look for the "export" commands being run on the device. Check to see whether the TFTP server being specified in the command is correct or not. If it is correct, you may need to manually debug TFTP transfers from the device to the NAS server. Alternately, edit the device and disable TFTP and the configuration will be captured directly from the CLI session.

return to top

Syslog Triggering

return to top