Driver Support Document

EXT_BlueCoat ProxySG 210, 300, 510, 600, 810, 900, 8000, 9000 series, OS Version 4.x, 5.x, 6.x

Show Tested Devices Grid

SYSOID Mapping
SYSOID MODEL OS VERSION
 1.3.6.1.4.1.3417.1.1.23 SG8000 SGOS 5.4.1.12
 1.3.6.1.4.1.3417.1.1.25 SG810 SGOS 5.4.1.12
 1.3.6.1.4.1.3417.1.1.26 SG210 SGOS 4.3.5.1, 5.3.2.1, 6.1.6.1
 1.3.6.1.4.1.3417.1.1.27 SG510 SGOS 5.4.3.3
 1.3.6.1.4.1.3417.1.1.29 SG9000 SGOS 5.4.3.3
 1.3.6.1.4.1.3417.1.1.31 SG600 SGOS 6.5.6.1
 1.3.6.1.4.1.3417.1.1.32 SG300 SGOS 6.5.4.1
 1.3.6.1.4.1.3417.1.1.34 SG900 SGOS 5.5.7.1
 1.3.6.1.4.1.3417.1.1.37 SG-400-30 SGOS 6.5.9.9
 1.3.6.1.4.1.3417.1.1.38 SG-S200-20 SGOS 6.5.8.2
 1.3.6.1.4.1.3417.1.6.2 ASG-S400 ASG 6.6.5.8

Driver Features Support Grid

Driver FeaturesAccess Methods
(X signifies feature support)CLISNMPTFTPCLI+TFTPSNMP+TFTPFTPCLI+FTPSNMP+FTPCLI+SFTPSCPCLI+SCPSNMP+SCPHTTP/HTTPS
X Driver Discovery release notes X X                      
X General Access  
(CLI protocols: telnet, ssh1, ssh2, console)
Supports SecurID 		X     X                 X
Configuration
X Retrieve Running Configuration release notes X     X                 X
  Retrieve Startup Configuration                            
  Retrieve Binary Configuration                            
X Device information parsing  
X Enhanced Layer2 Basic IP information parsing  
X Configuration Deployment to Running         X                  
  Configuration Deployment to Startup                            
  Binary Configuration Deployment                            
Diagnostics
X Routing Table   X                        
  OSPF Neighbors                            
X Interfaces   X                        
X Modules and Inventory   X                        
  Flash Storage Space                            
X File System   X                        
X Uptime     X                      
X ICMP Test   X                        
X Topology Parsing   X                        
X Duplex Parsing   X                        
X Enhanced VLAN Parsing  
Features
  Software Center                            
  Software Image Synchronization                            
X Password Management  
(Can modify: limited username, limited password, full password, read-only community strings, read/write community strings) 		X                        
X Syslog Configuration and Change Detection   Syslog patterns X                        
X Custom Scripts and Diagnostics  
Bulk deploy available 		X                        
  ACL Parsing  
  ACL Provisioning                            
X VLAN Provisioning   X                       X
X Configlet Parsing  
X QoS Parsing  
X VRF Parsing  
  Context Management                            

Driver Discovery

Release Notes

Presence of at least one Community string

Several tasks require a presence of at least one identical SNMP read community string on the device and an NA device password rule. Leave at least one SNMP read community string in deploy password task, which is identical with SNMP read community string on the device.

return to top

Retrieve Running Configuration

Release Notes

Brief configuration capture

By default, the BlueCoat driver captures the expanded configuration using the command 'show config expanded noprompts'. If the brief configuration is sufficient, it can be captured using the command 'show config brief noprompts' instead. To select this option, setthe device access variable "brief_config" to "true".

Capture of configuration via read-only administrator

Using read-only administrator the driver will initially try to capture configuration via CLI, in case of failure it will try HTTPS. To change capture configuration order to HTTPS and then CLI, set the device access variable "http_cli" to "true".

return to top

Driver Discovery

Release Notes (inherited)

More prompt causes an unexpected disconnection

Discovery tasks for Javascript drivers handle More prompts by using timeouts, which can cause problems with the third-party SSH client code, which interprets the timeout as a disconnection. There are two options to work around the problem. Setting the RCX option [<option name="Driver/Discovery/UsePollRead">true</option>] in site_options.rcx will effect the workaround for all affected devices. Alternatively, it could be applied to a single device by setting the device access variable "PollRead" to "true".

Wakeup Ctrl-U character can cause discovery to fail

Discovery tasks for Javascript drivers use wakeup characters are sent during device connection, to ensure that the device is responding. Normally, these characters do not echo to the console, but some devices may echo them. In this case, this causes the prompt detection phase to fail, which in turn can cause More prompts to not be handled properly, and discovery may fail. If these characters are echoed from the device [check the session log to see this], then set the device access variable "skip_ctrl_u" to skip the sending of the wakeup characters. Note that setting this option on a previously working device could cause discovery tasks to fail, but it only affects CLI discovery. SNMP discovery is unaffected.

return to top

Syslog Triggering

return to top