Integrations > Third Party Integrations > NetApp SANscreen Integration > SANscreen Integration by WebServices Job

SANscreen Integration by WebServices Job

Adapter

This job uses the NetApp SANscreen/OnCommand integration adapter.

Parameters

ChunkSize

Default: 1000

Integration Flow

The adapter works as follows:

  1. Connect to the SANscreen WebService API using credentials from the SANscreen protocol.

  2. Query for storage arrays and create STORAGE ARRAY CIs.

  3. Query for logical volumes, fiber channel adapters (Host Bus Adapters), and fiber channel ports on each storage array and create LOGICAL VOLUME, HBA, and FC PORT CIs.

  4. Query for fiber channel switches and create FC SWITCH CIs.

  5. Query for fiber channel adapters and ports on each fiber channel switch and create HBA and FC PORT CIs.

  6. Query for hosts/servers and create appropriate COMPUTER, WINDOWS, or UNIX CIs.

  7. Query for logical volumes, fiber channel adapters (Host Bus Adapters), and fiber channel ports on each host/server and create LOGICAL VOLUME, HBA, and FC PORT CIs.

  8. Query for paths between hosts/servers and storage arrays and add FCCONNECT relationships between respective hosts/servers, switches, and storage arrays.

  9. Query for logical volume mapping between logical volumes on hosts/servers and logical volumes on storage arrays and add DEPEND relationships between respective hosts/servers and storage arrays.