HPE ServiceGuard Cluster Commands

Output:

CLUSTER          STATUS
SomeClusterName    up


NODE    STATUS     STATE
Node1     up     running


Quorum_Server_Status:
NAME      STATUS    STATE
172.24.0.5 up      running


Network_Parameters:
INTERFACE   STATUS    PATH                NAME
PRIMARY         up      0/2/2/1                            lan3
PRIMARY      up      0/1/1/1              lan1
PRIMARY      up      0/2/2/0                        lan2
PRIMARY      up              0/1/1/0                        lan0
STANDBY      up      0/3/0/0/0/0/4/0/0/ lan7
STANDBY      up          0/3/0/0/0/0/2/0/0/ lan5
STANDBY      up                           0/3/0/0/0/0/4/0/0/ lan6
STANDBY           up                      0/3/0/0/0/0/2/0/0/ lan4


PACKAGE    STATUS   STATE    AUTO_RUN    NODE
PackageName1 up    running      enabled    Node1


Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover    configured_node
Failback    manual


Node_Switching_Parameters:
NODE_TYPE  STATUS  SWITCHING   NAME
Primary     up     enabled Node1 (current)


PACKAGE    STATUS   STATE    AUTO_RUN    NODE
PackageName2   up running enabled Node1


Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover    configured_node
Failback    manual


Script_Parameters:
ITEM    STATUS      MAX_RESTARTS RESTARTS NAME
Subnet    up     192.168.62.0
Subnet    up          172.24.0.0


Node_Switching_Parameters:
NODE_TYPE   STATUS  SWITCHING NAME
Primary      up     enabled Node1 (current)


PACKAGE STATUS STATE AUTO_RUN NODE
PackageName3 up running enabled Node1

Policy_Parameters:

POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual


Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary    up    enabled Node1 (current)


Mapping

Output of this command is used to fill in the attributes of the CIs:

CMD Output Attribute	CI Name	CI Attribute
SomeClusterName	Service Guard Cluster	Name
PackageName1,..., PackageName3	SG Package	Name
IP Address	SG Resource	Name
Subnet value	Network	Name
Node1	Node	Name

Output:

/etc/cmcluster/scripts/exampleapplicatie.cfg
/etc/cmcluster/package1/package1.cfg
/etc/cmcluster/package2/package2.cfg
/etc/cmcluster/package3/package3.cfg

Mapping:

This command is used to find package configuration files in the SG Cluster configuration directory.

Output:

/etc/cmcluster/scripts/exampleapplicatie.config
/etc/cmcluster/package1/package1.config
/etc/cmcluster/package2/package2.config
/etc/cmcluster/package3/package3.config

Mapping:

This command is used to find package configuration files in the SG Cluster configuration directory.

Output:

# "PACKAGE_NAME" is the name that is used to identify the package.
# Legal values for PACKAGE_NAME:
PACKAGE_NAME package1
# "RUN_SCRIPT" is the script that starts a package.
# Legal values for RUN_SCRIPT:
RUN_SCRIPT /etc/cmcluster/package1/package1.cntl
# "RUN_SCRIPT_TIMEOUT" is the number of seconds allowed for the package to start.

Mapping:

PACKAGE_NAME and RUN_SCRIPT variable values are used in further commands for discovery of IP and Mount Points, which are managed by this package.

Output:

Jul 11 09:27:10 - Node "Node1":
Mounting /dev/vg1/lvol1 at /oracle/somename1
Jul 11 09:27:22 - Node "Node1":
Mounting /dev/vg1/lvol2 at /oracle/somename2
Jul 11 09:27:53 - Node "Node1":
Mounting /dev/vg1/lvol3 at /oracle/somename3

Mapping:

Discovered data for mount points will be used to link the RunningSoftware to the proper Clustered Service (actually a package). This linking approach relies on the running process path.

Output:

Jun 12 09:27:11 - Node "Node1":
Adding IP address 192.168.62.146 to subnet 192.168.62.0
Jun 12 09:27:11 - Node "Node1":
Adding IP address 172.24.10.142 to subnet 172.24.0.0

Mapping:

Discovered IP Address and Network will be reported as corresponding CIs. This is done because not all IP Resources might be present in the cmviewcl output.

Output:

orauser 21926 1 0 Jun 9 ?
6:09 /oracle/somename1/applic/oracle/db/
10.2.0/instns1/bin/tnslsnr listener_name1 -inherit

Mapping:

From the fetched Oracle Listener process information ORACLE_HOME value, listener name and pid will be parsed out. ORACLE_HOME and listener name will be used in further discovery to get listener status and parse out Oracle DB SIDs.

Output:

LSNRCTL for HPUX: Version 10.2.0.5.0 -
Production on 20-JUL-2011 06:44:11
Copyright (c) 1991, 2010, Oracle. All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=oic6)))
STATUS of the LISTENER
------------------------
Alias listener_name1
Version TNSLSNR for HPUX: Version 10.2.0.5.0 -
Production Start Date 09-JUN-2011 21:56:34
Uptime 40 days 8 hr. 47 min. 36 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File
/oracle/somename1/applic/oracle/db/10.2.0/
instns1/network/admin/listener.ora
Listener Log File
/oracle/somename1/applic/oracle/db/10.2.0/
instns1/network/log/listener_name1.log
Listening Endpoints Summary...
DESCRIPTION=
ADDRESS=(PROTOCOL=ipc)(KEY=sid1)))
DESCRIPTION=
ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.24)(PORT=1521)))
DESCRIPTION=
ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROCsidas)))

Services Summary...
Service "PLSExtProcsid1" has 1 instance(s).
Instance "PLSExtProcdis1", status UNKNOWN,
has 1 handler(s) for this service...
Service "sid1.somedomain" has 1 instance(s).
Instance "sid1", status UNKNOWN,
has 1 handler(s) for this service...
The command completed successfully

Mapping:

Instance value will be parsed out and treated as SID; any instance name starting from PLSExtProc will be filtered out since this is RPC call service.

Mapping:

Discovered IP and port information is used to set Application IP and Port on reported Running Software.

Output:

......skip......
<ias-instance id="somename.somedomain">
<environment>
<variable id="TMP" value="/tmp"/>
<variable id="LD_LIBRARY_PATH" value="/usr/lib"/>
<variable id="LD_PRELOAD" value="libloghost.so.1"/>
......skip......

Mapping:

The Oracle iAS CI name is taken from value of ias-instance in the following order: parameter name, parameter id, Default Server.