IBM Virtualization Commands

Output

version= Version: 7 Release: 3.5.0 Service Pack: 0 HMC Build level 20091201.1 MH01195: Required fix for HMC V7R3.5.0 (10-16-2009) MH01197: Fix for HMC V7R3.5.0 (11-12-2009) MH01204: Fix for HMC V7R3.5.0 (12-11-2009) ","base_version=V7R3.5.0 "

Mapping

The output of this command is used to fill in the attributes of the IBM HMC CI:

Output

vpd=*FC ???????? *VC 20.0 *N2 Tue Apr 27 13:05:33 CEST 2010 *FC ???????? *DS Hardware Management Console *TM eserver xSeries 335 -[XXXXCR2]- *SE XXXXXXX *MN IBM *PN Unknown *SZ 1059495936 *OS Embedded Operating Systems *NA 192.168.1.10 *FC ???????? *DS Platform Firmware *RM V7R3.5.0.0

Mapping

The output of this command is used to fill in the attributes of the IBM HMC CI:

Output

bios=T2E139AUS-1.15

Mapping

The output of this command is used to fill in the attributes of the IBM HMC CI:

Output

hostname=hmc01,domain=somedomain.com,
"ipaddr=192.168.1.10,0.0.0.0,192.168.128.1",
"networkmask=255.255.254.0,255.255.255.0,255.255.128.0",
gateway=192.168.1.1,nameserver=,domainsuffix=,
slipipaddr=192.168.1.1,slipnetmask=255.255.0.0,
"ipaddrlpar=192.168.80.1,192.168.128.1",
"networkmasklpar=255.255.254.0,255.255.128.0",
clients=,ipv6addrlpar=,ipv4addr_eth0=192.168.1.10,
ipv4netmask_eth0=255.255.254.0,ipv4dhcp_eth0=off,ipv6addr_eth0=,
ipv6auto_eth0=off,ipv6privacy_eth0=off,ipv6dhcp_eth0=off,
lparcomm_eth0=off,jumboframe_eth0=off,speed_eth0=100,
duplex_eth0=full,tso_eth0=off,ipv4addr_eth1=0.0.0.0,
ipv4netmask_eth1=255.255.255.0,ipv4dhcp_eth1=off,
ipv6addr_eth1=,ipv6auto_eth1=off,ipv6privacy_
eth1=off,ipv6dhcp_eth1=off,lparcomm_eth1=off,jumboframe_
eth1=off,speed_eth1=auto,duplex_eth1=auto,tso_
eth1=off,ipv4addr_eth2=192.168.128.1,ipv4netmask_
eth2=255.255.128.0,ipv4dhcp_eth2=off,ipv6addr_
eth2=,ipv6auto_eth2=off,ipv6privacy_eth2=off,ipv6dhcp_
eth2=off,lparcomm_eth2=off,jumboframe_eth2=off,speed_
eth2=auto,duplex_eth2=auto,tso_eth2=off

Mapping

The output of this command is used to fill in the network information for a particular HMC machine. A host with HMC running on it is always reported as an incomplete host, since there is no information regarding the interface MAC addresses and the default UNIX command does not work in this environment.

Output

2,192.168.80.52,3;1,192.168.80.62,3;3,192.168.80.53,3

Mapping

Each block in the output is separated by the semicolon character (;). The first value is the LPAR ID and the second value is the LPAR IP address. By matching the ID of the LPAR with output from other commands an incomplete host is created and reported with an assigned LPAR Profile CI.

Output

name=XXXXXXX-XXXX-XXX-XXXXXXXXX-XX,type_model=XXXX-XXX, serial_num=XXXXXX,ipaddr=192.168.1,10,state=Operating,sys_time=04/27/2010 12:55:23,power_off_policy=1,active_lpar_mobility_capable=0,inactive_lpar_mobility_capable=0,active_lpar_share_idle_procs_capable=0,active_mem_sharing_capable=0,bsr_capable=0,cod_mem_capable=0,cod_proc_capable=1,electronic_err_reporting_capable=0,firmware_power_saver_capable=0,hardware_power_saver_capable=0,hardware_discovery_capable=0,addr_broadcast_perf_policy_capable=0,hca_capable=1,huge_page_mem_capable=1,lhea_capable=0,lpar_avail_priority_capable=0,lpar_proc_compat_mode_capable=0,micro_lpar_capable=1,os400_capable=0,5250_application_capable=0,redundant_err_path_reporting_capable=1,shared_eth_failover_capable=1,sni_msg_passing_capable=0,sp_failover_capable=1,vet_activation_capable=1,virtual_fc_capable=0,virtual_io_server_capable=1,virtual_switch_capable=0,assign_5250_cpw_percent=0,max_lpars=40,max_power_ctrl_lpars=1,hca_bandwidth_capabilities=null,service_lpar_id=none,curr_sys_keylock=norm,pend_sys_keylock=norm,curr_power_on_side=temp,pend_power_on_side=temp,curr_power_on_speed=fast,pend_power_on_speed=fast,curr_power_on_speed_override=none,pend_power_on_speed_override=none,power_on_type=power on,power_on_option=standby,power_on_lpar_start_policy=userinit,pend_power_on_option=standby,pend_power_on_lpar_start_policy=userinit,power_on_method=02,power_on_attr=0000,sp_boot_attr=0000,sp_boot_major_type=08,sp_boot_minor_type=01,sp_version=00030030,mfg_default_config=0,curr_mfg_default_ipl_source=a,pend_mfg_default_ipl_source=a,curr_mfg_default_boot_mode=norm,pend_mfg_default_boot_mode=norm

Mapping

For each detected IBM Pseries Frame, a Hypervisor CI is created with the set name attribute IBM Hypervisor.

The output of this command is used to fill in the attributes of the IBM PSeries Frame CI:

Output

configurable_sys_proc_units=4.0,curr_avail_sys_proc_units=1.4, pend_avail_sys_proc_units=1.4,installed_sys_proc_units=4.0, max_capacity_sys_proc_units=deprecated,deconfig_sys_proc_units=0, min_proc_units_per_virtual_proc=0.1,max_virtual_procs_per_lpar=64,max_procs_per_lpar=4,max_curr_virtual_procs_per_aixlinux_lpar=64,max_curr_virtual_procs_per_vios_lpar=64, max_curr_virtual_procs_per_os400_lpar=64,max_curr_procs_per_aixlinux_lpar=4, max_curr_procs_per_vios_lpar=4,max_curr_procs_per_os400_lpar=4, max_shared_proc_pools=1

Mapping

The output of this command is used to fill in the attributes of the IBM PSeries Frame CI:

Output

configurable_sys_mem=32768,curr_avail_sys_mem=1344,pend_avail_sys_mem=1344, installed_sys_mem=32768,max_capacity_sys_mem=deprecated,deconfig_sys_mem=0, sys_firmware_mem=704,mem_region_size=64,configurable_num_sys_huge_pages=0, curr_avail_num_sys_huge_pages=0,pend_avail_num_sys_huge_pages=0, max_num_sys_huge_pages=1,requested_num_sys_huge_pages=0,huge_page_size=16384, max_mem_pools=0

Mapping

The output of this command is used to fill in the attributes of the IBM PSeries Frame CI:

Output

configurable_pool_proc_units=4.0,curr_avail_pool_proc_units=1.4,pend_avail_pool_proc_units=1.4

Mapping

If there are no user-defined pools, the pool_id parameter does not appear in the output (pool_id is considered by the system to be zero by default).

The output of this command is used to fill in the attributes of the IBM Processor Pool CI:

Output

name=somelparname1,lpar_id=5,lpar_env=aixlinux,state=Running,resource_config=1,os_version=Unknown,logical_serial_num=65B922G5,default_profile=somedefaultprofilename1,curr_profile=somelparprofilename1,work_group_id=none,shared_proc_pool_util_auth=1,allow_perf_collection=1,power_ctrl_lpar_ids=none,boot_mode=sms,lpar_keylock=norm,auto_start=0,redundant_err_path_reporting=0 

Mapping

The output of this command is used to fill in the attributes of the IBM LPAR Profile CI:

Output

name=name1,lpar_name=name2,lpar_id=5,lpar_env=aixlinux,
all_resources=0,min_mem=4096,desired_mem=8192,max_mem=8192,
min_num_huge_pages=0,desired_num_huge_pages=0,
max_num_huge_pages=0,proc_mode=shared,min_proc_units=0.3,
desired_proc_units=0.5,max_proc_units=1.0,min_procs=1,
desired_procs=2,max_procs=2,sharing_mode=uncap,
uncap_weight=128,io_slots=none,lpar_io_pool_ids=none,
max_virtual_slots=10,"virtual_serial_adapters=0/server/1/
any//any/1,1/server/1/any//any/1","virtual_scsi_adapters=5/
client/1/l11s12vio1/13/1,6/client/1/l11s12vio1/14/1,7/client
/1/l11s12vio1/15/1",virtual_eth_adapters=2/0/1//0/1,
hca_adapters=none,boot_mode=norm,conn_monitoring=1,auto_start=0,
power_ctrl_lpar_ids=none,work_group_id=none,redundant_err_path_reporting=0
name=name3,lpar_name=name4,lpar_id=4,lpar_env=aixlinux,all_resources=0,
min_mem=4096,desired_mem=10240,max_mem=10240,min_num_huge_pages=0,
desired_num_huge_pages=0,max_num_huge_pages=0,proc_mode=shared,
min_proc_units=0.3,desired_proc_units=0.7,max_proc_units=1.0,
min_procs=1,desired_procs=2,max_procs=2,sharing_mode=uncap,
uncap_weight=128,io_slots=none,lpar_io_pool_ids=none,
max_virtual_slots=10,"virtual_serial_adapters=0/server
/1/any//any/1,1/server/1/any//any/1",
"virtual_scsi_adapters=5/client/1/l11s12vio1/10/1,6/
client/1/l11s12vio1/11/1,7/client/1/l11s12vio1/12/1",
virtual_eth_adapters=2/0/2//0/1,hca_adapters=none,boot_mode=norm,
conn_monitoring=1,auto_start=0,power_ctrl_lpar_ids=none,
work_group_id=none,redundant_err_path_reporting=0 

Mapping

The output of this command is used to fill in the attributes of the IBM LPAR Profile CI:

Output

lpar_name=name1,lpar_id=1,slot_num=2,state=1,is_required=1,is_trunk=1,trunk_priority=1, ieee_virtual_eth=0,port_vlan_id=1,addl_vlan_ids=,mac_addr=765920001002 
lpar_name=l11s12vio1,lpar_id=1,slot_num=3,state=1,is_required=1,is_trunk=1,trunk_priority=1, ieee_virtual_eth=0,port_vlan_id=2,addl_vlan_ids=,mac_addr=765920001003 
lpar_name=name2,lpar_id=2,slot_num=2,state=1,is_required=1,is_trunk=0,ieee_virtual_eth=0, port_vlan_id=1,addl_vlan_ids=,mac_addr=765920002002 
lpar_name=name3,lpar_id=3,slot_num=2,state=1,is_required=1,is_trunk=0,ieee_virtual_eth=0, port_vlan_id=1,addl_vlan_ids=,mac_addr=765920003002 
lpar_name=name4,lpar_id=4,slot_num=2,state=1,is_required=1,is_trunk=0,ieee_virtual_eth=0, port_vlan_id=2,addl_vlan_ids=,mac_addr=765920004002 
lpar_name=name5,lpar_id=5,slot_num=2,state=1,is_required=1,is_trunk=0,ieee_virtual_eth=0, port_vlan_id=1,addl_vlan_ids=,mac_addr=765920005002

Mapping

The mac_addr attribute is represented in the Dec form without leading zeros. This value is transformed to the Hex value and left padded with missing zeros, to assure a proper representation of the MAC address in the CMDB.

Based on the MAC address, the virtual NICs are created and attached to the corresponding LPAR or VIO server, and are described by Lpar_name or Lpar_id. The Vlan CI is created based on vlan_id or addl_vlan_ids and is linked to the ports of the interfaces. The root container for the VLAN is a specific IBM PSeries Frame (Managed System).

Output

lpar_name=vioname1,lpar_id=1,slot_num=15,state=1,is_required=0,adapter_type=server,remote_lpar_id=5,remote_lpar_name=lparname1,remote_slot_num=7 
lpar_name=vioname1,lpar_id=1,slot_num=14,state=1,is_required=0,adapter_type=server,remote_lpar_id=5,remote_lpar_name=lparname2,remote_slot_num=6 
lpar_name=vioname1,lpar_id=1,slot_num=13,state=1,is_required=0,adapter_type=server,remote_lpar_id=5,remote_lpar_name=lparname2,remote_slot_num=5 

Mapping

The lpar_name and lpar_id attributes are always the name and ID of the VIO server that creates and grants the Virtual SCSI to the LPARs. The SCSI Adapter on the LPAR is identified by its slot number and the LPAR name it belongs to.

Output

lpar_name=name1,lpar_id=5,curr_shared_proc_pool_id=0,curr_proc_mode=shared,curr_min_proc_units=0.3,curr_proc_units=0.5,curr_max_proc_units=1.0,curr_min_procs=1,curr_procs=2,curr_max_procs=2,curr_sharing_mode=uncap,curr_uncap_weight=128,pend_shared_proc_pool_id=0,pend_proc_mode=shared,pend_min_proc_units=0.3,pend_proc_units=0.5,pend_max_proc_units=1.0,pend_min_procs=1,pend_procs=2,pend_max_procs=2,pend_sharing_mode=uncap,pend_uncap_weight=128,run_proc_units=0.5,run_procs=2,run_uncap_weight=128 

Mapping

Using the "lpar_name"/"lpar_id" along with the "curr_shared_proc_pool_id" from the output we can create corresponding links to the particular Shared Processor Pool ("IBM Processor Pool") the LPar uses. In case of the dedicated ("ded") CPU we will create links to the spare processors.

Output

unit_phys_loc=XXXXX.XXX.XXXXXXX,bus_id=2,phys_loc=C3,drc_index=21010002,lpar_name=name1,lpar_id=1,slot_io_pool_id=none,description=RAID Controller,feature_codes=none,pci_vendor_id=1069,pci_device_id=B166,pci_subs_vendor_id=1014,pci_subs_device_id=0278,pci_class=0104,pci_revision_id=04,bus_grouping=0,iop=0,parent_slot_drc_index=none,drc_name=XXXXX.XXX.XXXXXXX-XX-XX 

Mapping

The output of this command is used to create the I/O Slot CI. Using the name and ID of the LPAR, discovery creates the relationship to the particular LPAR that is using the slot.