Supported hardware

  • HPE ProLiant Servers

Supported operating systems

Baseline HPE ProLiant RAID configuration capture

HPE ProLiant RAID configuration capture is supported by the following SA-provided boot images:

  • Red Hat Enterprise Linux 5
  • Red Hat Enterprise Linux 6

Note Solaris (SPARC, x86) is not supported.

HPE ProLiant RAID provisioning

  • Linux OS Sequences: HPE ProLiant RAID provisioning can be performed on any SA-supported Linux operating system that can be installed on HPE ProLiant servers.
  • Windows OS Sequences: HPE ProLiant RAID provision can be performed on any SA-supported Windows version that can be installed on HPE ProLiant servers.

Note The Red Hat Enterprise Linux 5/ Linux 6 boot images (Red Hat enterprise Linux 5.6 and 6.0 base) use a newer version of the Array Configuration Utility (ACU) tool. Therefore, HPE ProLiant RAID configurations captured using the Red Hat Enterprise Linux 5 boot image can be successfully deployed only on unprovisioned servers that registered with the SA Core using the linux5/linux6 boot images. Deployment of an HPE ProLiant RAID configuration captured with the linux5 (Red Hat Enterprise Linux 5 base) boot image to an unprovisioned server that registered with the SA Core using a different boot image will fail due to differing ACU tool versions

HPE also occasionally updates the ACU tool which, in rare cases, can cause RAID configurations captured by an older version of the tool to be invalid. In these cases, you should rerun the RAID capture as described below in order to update the RAID capture.