Search for	Example	Results
A single word	`cat`	Topics that contain the word "cat". You will also find its grammatical variations, such as "cats".
A phrase. You can specify that the search results contain a specific phrase.	`"cat food"` (quotation marks)	Topics that contain the literal phrase "cat food" and all its grammatical variations. Without the quotation marks, the query is equivalent to specifying an OR operator, which finds topics with one of the individual words instead of the phrase.

Search for	Operator	Example
Two or more words in the same topic	`AND` `and` `+` (plus symbol) `&` (ampersand)	`cat AND dog` `"cat food"+milk` `"cat food"&"dog food"`
Either word in a topic	`OR` `or` `\|` (pipe)	`cat OR dog` `cat \| dog`
Topics that do not contain a specific word or phrase	`NOT` `not` `!` (exclamation point)	`NOT cat` `! dog`
Topics that contain one string and do not contain another	`^` (caret)	`cat ^ mouse`
A combination of search types	`( )` parentheses	`cat + (dog \| mouse)` `cat \| dog + (! mouse)`

Network Node Manager i Software10.30

Administer > Configure Incidents > Configure SNMP Trap Incidents > SNMP Trap Configuration Form > Configure Node Settings for an SNMP Trap Incident > Configure a Payload Filter for an Incident Action (Node Settings) (SNMP Trap Incidents)

Configure a Payload Filter for an Incident Action (Node Settings) (SNMP Trap Incidents)

The Payload Filter Editor enables you to create expressions that further refine the filters used to select the incidents that cause the configured action to run. Make sure to design any complex Payload Filters offline as a Boolean expression first. This method can help to minimize errors when entering your expressions using the Payload Filter editor.

To create a Payload Filter expression:

Navigate to the SNMP Trap Configuration form:
1. From the workspace navigation panel, select the Configuration workspace.
2. Expand the Incidents folder.
3. Select SNMP Trap Configurations .
4. Do one of the following:
  1. To create an incident configuration, click the New icon, and continue.
  2. To edit an incident configuration, select a row, click the Open icon, and continue.
  3. To delete an incident configuration, select a row and click the Delete icon.
Select the Node Settings tab.
Do one of the following:
1. To create a new configuration, click the New icon.
2. To edit an existing configuration, select a row, click the Open icon, and continue.
3. To delete an existing configuration, select a row and click the Delete icon.
Make sure you configure the basic Node Setting behavior. See Configure Node Settings for an SNMP Trap Incident for more information.
Select the Actions tab.
Do one of the following:
1. To create an Action configuration, click the New icon, and continue.
2. To edit an Action configuration, select a row, click the Open icon, and continue.
3. To delete an Action configuration, select a row and click the Delete icon.
Make sure the Action Configuration settings are configured. See Configure Incident Actions for a Node Group (SNMP Trap Incident) for more information.

Select the Payload Filter tab.
Define your Payload Filter (see table).
1. Plan out the logic needed for your Filter String.
2. Use the buttons on the bottom half of the Additional Filters Editor to establish the logic structure.
  
  For example, to establish the following structure, click AND, then AND, and then OR:
  
  (( ) AND ( ))
3. Now place your cursor in a location within the displayed Filter String, and use the top half of the filter editor to define the parameters of the highlighted filter requirement.
  
  For example, select a set of parentheses and use the Insert button to specify the filter requirement within those parentheses:
Click Save and Close.
Click Save and Close to save your changes and return to the previous form.

Payload Filter Editor Settings
Attribute	Description
Attribute	The attribute name on which NNMi searches. Filterable attributes include the following: ciaName ciaValue Note When you use `ciaName` and `ciaValue` in a Payload Filter, you must enter the `ciaName` and `ciaValue` as a pair. For example: `(ciaName =.1.3.6.1.4.1.9.9.13.1.2.1.7 ) AND ( (ciaValue = 4) OR ( ciaValue = 5))` is not supported.
Operator	Valid operators are described below. = Finds all values equal to the value specified. Example: `ciaName = .1.3.6.1.4.1.9.9.13.1.2.1.7` matches any incident that contains a varbind with the name value .1.3.6.1.4.1.9.9.13.1.2.1.7. != Finds all values not equal to the value specified. Example: `ciaName != .1.3.6.1.4.1.9.9.13.1.2.1.7` matches any incident that contains a varbind with the name value other than 1.3.6.1.4.1.9.9.13.1.2.1.7. < Finds all values less than the value specified. Example: `ciaValue < 6` matches any incident with a varbind value less than 6. <= Finds all values less than or equal to the value specified. Example: `ciaValue <= 6` matches any incident with a varbind value less than or equal to 6. > Finds all values greater than the value specified. Example: `ciaValue > 4` matches any incident with a varbind value greater than 4. >= Finds all values greater than or equal to the value specified. Example: `ciaValue >= 4` matches any incident that contains a varbind with values greater than or equal to 4. between Finds all traps or events that include a varbind with a value equal to and between the two values specified. Example: `ciaValue between` matches any incident that contains a varbind value equal to or greater than 1 and equal to or less than 4. As shown in the example, each value must be entered on a separate line. in Finds any match to at least one value in a list of values. Example: `ciaValue in` matches any incident with a varbind value of either 4 or 5. As shown in the example, each value must be entered on a separate line. NNMi displays the list of attributes using comma-separated values enclosed in parentheses, for example (4, 5). However, the comma-separated list is used only for display purposes. The actual delimiter is the new line. is not null Finds all non-blank values. Example: `ciaValue is not null` matches any incident with a varbind that contains a value. is null Finds all blank values. Example: `ciaValue is null` matches any incident with a varbind that does not have a value. like Finds matches using wildcard characters. Click here for more information about using wildcard characters. The period asterisk (.) characters mean any number of characters of any type at this location. The period (.) character means any single character of any type at this location. Note To include literal string values in the Value attribute, enclose the string value in \Q<literal_value>\E as shown in the Examples listed below. Examples: `ciaName like \Q.1.3.6.1.4.1.9.9\E.` finds all traps or events that contain varbind names that begin with .1.3.6.1.4.1.9.9 and (optionally) end with any number of characters. `ciaValue like .Chicago.` finds all traps or events that contain a varbind value that includes the string Chicago. not between Finds all values except those between the two values specified. Example: `ciaValue not between 5 8` matches an incident that contains a varbind with the values less than 5 or greater than 8. not in Finds all values except those included in the list of values. Example: `ciaValue not in` matches any incident that contains a varbind with values other than 1 and 2. As shown in the example, each value must be entered on a separate line. NNMi displays the list of attributes using comma-separated values enclosed in parentheses, for example, (1, 2). However, the comma-separated list is used only for display purposes. The actual delimiter is the new line. not like Finds all that do not have the values specified (using wildcard strings). The period asterisk (.) characters mean any number of characters of any type at this location. The period (.) character means any single character of any type at this location. Note To include literal string values in the Value attribute, enclose the string value in \Q<literal_value>\E as shown in the Examples listed below. Example: `ciaName not like \Q.1.3.6.1.4.1.9.9\E.` matches any incident that contains a varbind name value that does not begin with .1.3.6.1.4.1.9.9. `ciaValue not like .Chicago.` finds all traps or events that do not contain a varbind value that includes the string Chicago.
Value	The value for which you want NNMi to search. The values you enter are case sensitive. NNMi displays a variable number of value fields depending on the Operator selected. For example, the `between` Operator causes two value fields to be displayed. The `between, in` and `not in` operators require that each value be entered on a separate line.

Additional Filters Editor Buttons
Button	Description
Append	Appends the current expression (Attribute, Operator, and Value) to the selected expression already included in the Filter String.
Insert	Inserts the current expression (Attribute, Operator, and Value) in front of the cursor location within the Filter String.
Replace	Replaces the selected expression with the expression displayed in the Attribute, Operator, and Value fields.
AND	Appends, inserts, or replaces the AND Boolean Operator in the selected cursor location. View the expression displayed under Filter String to see the logic of the expression as it is created.
OR	Appends, Inserts, or replaces the OR Boolean Operator in the current cursor location. View the expression displayed under Filter String to see the logic of the expression as it is created.
NOT	Can be used in any part of the Filter String to specify that NNMi should exclude interfaces with values that pass the expression that immediately follows the `NOT`. For example, when evaluating the following expression, NNMi includes interfaces with (interface description) `ifDesc` containing VLAN, and excludes any Interfaces that have VLAN10 for the (interface name) `ifName` value: `(ifDesc like VLAN AND NOT (ifName=VLAN10))` View the expression displayed under Filter String to see the logic of the expression as it is created .
EXISTS	Used for filters that include Capabilities or Custom Attribute names and values in the Filer String. Indicates that you want NNMi to consider interfaces that have Capabilities or Custom Attributes when evaluating the Filter String. Tip When creating complex Filter Strings that include `customAttrName` and `customAttrValue` pairs as one component of an "or" statement, to prevent NNMi from excluding Nodes that have zero Custom Attributes, use EXISTS or NOT EXISTS criteria for the `customAttrName` and `customAttrValue` pair definitions. Otherwise Nodes that do not have any Custom Attributes are automatically excluded even if they have values that pass other aspects of your filter. For example, when evaluating the following Filter String, NNMi includes interfaces with (interface description) `ifDesc` containing VLAN, as well as any Interfaces Custom Attribute Role value is LAN Connection to Oracle Server: `(ifDesc like VLAN OR EXISTS((customAttrName=Role AND customAttrValue=LAN Connection to Oracle Server)))` View the expression displayed under Filter String to see the logic of the expression as it is created.
NOT EXISTS	Used for filters that include Capabilities or Custom Attribute names and values in the Filer String. Indicates that you want NNMi to consider interfaces that do not have any Capabilities or Custom Attributes when evaluating the Filter String, but exclude the interfaces that match the expression that follows the NOT EXISTS. Tip When creating complex Filter Strings that include `customAttrName` and `customAttrValue` pairs as one component of an "or" statement, to prevent NNMi from excluding Nodes that have zero Custom Attributes, use EXISTS or NOT EXISTS criteria for the `customAttrName` and `customAttrValue` pair definitions. Otherwise Nodes that do not have any Custom Attributes are automatically excluded even if they have values that pass other aspects of your filter. For example, when evaluating the following expression, NNMi includes interfaces with (interface description) `ifDesc` containing VLAN, and excludes any Interfaces that have the Custom Attribute Role and that Role value is LAN Connection to Oracle Server: `(ifDesc like VLAN OR NOT EXISTS((customAttrName=Role AND customAttrValue=LAN Connection to Oracle Server)))` View the expression displayed under Filter String to see the logic of the expression as it is created.
Delete	Deletes the selected expression. If the Boolean Operator is selected, the Additional Filters Editor deletes all expressions associated with the Boolean Operator.

Send Help Center feedback